If you have a concrete slab on the main floor or basement, you may be wondering if it's possible to install hardwood floors directly on top of the concrete. Subfloors made of concrete are usually in the shape of a solid concrete slab, such as a basement floor or an above-grade slab base. Watch this video as Bob Villa watches professionals install solid wood on a concrete floor at ground level. If something is already laid on top of the concrete, you should remove it before you start installing hardwood floors.
The reason the contractor or seller will ask is that most hardwood flooring manufacturers don't recommend installing your floors below the level of the level. Even if your home was built on a concrete slab, you can still enjoy the beauty and charm of hardwood floors. It's usually best to have a hardwood expert come to your home and give you tips and options on what works best in your home. Most manufacturers advise against installing hardwood floors on concrete for two reasons, moisture levels in concrete and the difficulty of adhering directly to concrete.
Humidity can pose problems for solid wood floors below ground level, so designer hardwood floors (made of glued layers of wood) are the best option there. If an installer nails the design floor too close to the edge, it can crack the board and cause dangerous chips that lurk underfoot and can measure up to 3 inches in length in some cases. Most flooring manufacturers say that hardwood should not be installed on concrete if tests show that the moisture emission rate is greater than 3 pounds. Many manufacturers do not recommend installing hardwood floors on concrete slabs that are below ground or basement level.
Putties and trowels Hot asphalt is usually used only for laying screeds on concrete, and the screeds should be laid immediately after pouring the putty (always follow the manufacturer's instructions). At this point, if the floor is installed, the only way to fix it is to tear the floor and start over. If you want to install a new floor but currently have a concrete slab for the floor, you may be wondering if it is possible to install a hardwood floor. Although Easiklip is the easiest hardwood floor to install on concrete, there are three things you should do before laying a floating floor.
AcclimatizationWhen the site is prepared, the floor can be delivered and stored in each room where it will be installed.